Verilog Based UART System Design

Volume 6 Issue 2 January - June 2018

Research Paper

Verilog Based UART System Design

Dharmendra Singh* , Upendra Soni**, Karan Shobhani***, Yash Karkashe****, Shubham Limje*****, Aayush Nayak******

*-** Assistant Professor, Department of Electronics and Telecommunication Engineering, Shri Shankaracharya Institute of Professional Management and Technology (SSIPMT), Raipur affiliated by CSVTU, Bhilai, Chhattisgarh, India.

***-****** UG Scholar, Department of Electronics and Telecommunication Engineering, Shri Shankaracharya Institute of Professional Management and Technology, Raipur affiliated by CSVTU, Bhilai, Chhattisgarh, India.

Singh, D., Soni, U., Shobhani, K., Karkashe, Y., Limje, S., and Nayak, A. (2018). Verilog Based UART System Design, i-manager's Journal on Embedded Systems, 6(2), 34-39. https://doi.org/10.26634/jes.6.2.14057

Abstract

Universal Asynchronous Receiver Transmitter (UART) nowadays become more popular for serial communication over a computer or any other peripherals. UART is based on the serial communication protocol used for very short distance communication. It works on full duplex transmitter and receiver mode. UART is specially designed for the interfacing between RS232 line and Microcontroller so that any serial communicating device can easily connect with the other peripherals. It allows the exchange of the data between the processor and peripherals. The serial communications are assumed to have more reliable data transmission than the parallel communication. The parallel devices require more hardware due to which the circuitry becomes more complex as compared to the serial communication device. In this paper, verilog based UART has been proposed to design.